Specialist Roofing & Cladding

Division of Aquaheat New Zealand Ltd

Roll Cap

Roll Cap is formed with smooth flat pan and standing panel edges. Trays are secured with concealed clips and finished with separate folded roll cap clipped over the standing panel edges. Roll Seam is formed in the same manner as Roll Cap except with a roll seamed cap which give and extra shadow line which emphasizes the line of the cap. Both systems are suitable for wall cladding and roofs with a pitch not less than 3˚.

 

>> ROLL CAP DATA (Download Technical Details PDF)

>> ROLL SEAM DATA (Download Technical Details PDF)

 

Roll Cap/Roll Seam Projects

 

Paekakariki Residence

>> View full project details

Oriental Bay Residence

>> View full project details

Greytown Residence

>> Project details to come

 

 

Clyde Quay Wharf

>> View Full Project details

 

Seatoun Residence

 

 

New Project Coming Soon

 

 

 

Key Advantages


Traditional System widely used throughout the world.


Economical: The use of profiling and seaming machines for the closure of the longitudinal seam joints significantly reduces installation time. This reduction makes for a more cost-effective solution, particularly when considering large surface areas. Roll Cap install is also made much more economical as you easily stop and start where you need to and change panels/trays if need be.


Greater Structural Stability:  As with all fully supported systems, there is a requirement for a plywood substrate which not only ensures an extra durable roof or wall but also provides extra lateral bracing for the building as a whole.


Thermal Expansion:  Roll Cap System allows for thermal expansion in the panel joints and clips.


Acoustics and thermal benefits: Less noise transfer from the outside, less heat will escape in the winter and less heat will penetrate into the building in the summer.


Safety: Safety hooks can be installed easily without compromising the roofing system allowing for easy access when maintenance is required.  Plywood substrate makes for an Earthquake resistant building.


Versatile: Available in both Roll Cap and Roll Seam profiles. These systems are suitable for roofs with a pitch not less than 3˚, and may also be installed as a wall cladding system. Roll Cap and Roll Seam are suited to all surface aspects including Zinc, CopperStainless Steel, Colour coated Aluminium.


Sustainable: The Roll Cap profile lends itself to easy to the installation of solar panels. Classic Metal draws on traditional craftsmanship to create more robust systems which are built to last 50-100 years and require minimal maintenance. Many of the material options are able to be recycled or produced from up to 100% recycled material.  


Building Consent


A key advantage of the Roll Cap system is that it is covered in Section 11 of the NZ Metal Roof and Wall Cladding Code of Practice ‘Secret fixed Cladding” which can aid your building consent application.  It often helps to include a copy of this along with your Classic Metal project specific specification to support your application for building consent.   Download your copy here:
http://metalroofing.org.nz/frontend/download the COP.cfm

 

Specification: Classic Metal can also provide a project specific specification.

 

Typical Details


Please contact us to sign up as a member and download the Classic Metal Manual.